Human Motilin（MTL） FOR RESEARCH USE ONLY

2011年09月06日 09:42:12 人气: 925 来源: 上海瑞齐生物科技有限公司

Human Motilin（MTL） FOR RESEARCH USE ONLY

Assay range：20 pg/ml -480 pg/ml 96determinations

Purpose

This kit allows for the determination ofMTLconcentrations in Humanserum, cellculture supernates and other biological fluids

Principle of the assay

The kit assay Human Motilin（MTL） level in the sample，use Purified Human Motilin（MTL）antibody to coat microtiter plate wells, make solid-phase antibody, then addHuman Motilin（MTL）to wells,Combined antibody which With HRP labeled goat anti- Human become antibody - antigen - enzyme-antibody complex, after washing Compley,Add TMB substrate solution,TMB substrate becomes blue color At HRP enzyme-catalyzed,reaction is terminated by the addition of a sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450 nm. The concentration of Human Motilin（MTL）in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Materials provided with the kit

1	wash solution	20ml×1bottle	7	Stopp Solution	6ml×1 bottle
2	HRP-Conjugate reagent	6ml×1 bottle	8	Standard（960pg/ml）	0.5ml×1 bottle
3	Microelisa stripplate	12well×8strips	9	Standard diluent	1.5ml×1bottle
4	Sample diluent	6ml×1 bottle	10	Instruction	1
5	Chromogen Solution A	6ml×1 bottle	11	Closure plate membrane	2
6	Chromogen Solution B	6ml×1 bottle	12	Sealed bags	1

Specimen requirements

1. extractas soon as possible after Specimen collection,and according to the relevant literature, and should be experiment as soon as possible after the extraction. If it can’t, specimen can be kept in -20 ℃ to preserve, Avoid repeated freeze-thaw cycles.

2. Can’t detect the sample which contain NaN3, because NaN3 inhibits HRP active.

Assay procedure

1. Dilute and add sample:Dilute Original density Standard as follow table:

480pg/ml	5 Standard	150μl Original density Standard+150μl Standard diluent
240 pg/ml	4 Standard	150μl 5 Standard+150μl Standard diluent
120 pg/ml	3 Standard	150μl 4 Standard+150μl Standard diluent
60 pg/ml	2 Standard	150μl 3 Standard +150μl Standard diluent
30 pg/ml	1 Standard	150μl 2 Standard +150μl Standard diluent

2.add sample：Set blank wells separay （blank comparison wells don’t add sample and HRP-Conjugate reagent, other each step operation is same）. testing sample well. add Sample dilution 40μl to testing sample well, then add testing sample 10μl （sample final dilution is 5-fold）, add sample to wells , don’t touch the well wall as far as possible, and Gently mix.

3.Incubate: After closing plate with Closure plate membrane ,incubate for 30 min at 37℃.

4.Configurate liquid: 30-fold wash solution diluted 30-fold （or 20-fold） with distilled water and reserve.

5.washing：Uncover Closure plate membrane, discardLiquid, dry by swing, add washing buffer to every well, still for 30s then drain,repeat 5 times, dry by pat.

6.add enzyme：Add HRP-Conjugate reagent 50μl to each well, except blank well.

7.incubate：Operation with 3.

8.washing：Operation with 5.

9.color：Add Chromogen Solution A 50ul and Chromogen Solution B to each well, evade the light preservation for 15 min at 37℃

10.Stop the reaction：Add Stop Solution50μl to each well, Stop the reaction（the blue color change to yellow color）.

11.assay：take blank well as zero , Read absorbance at 450nm after Adding Stop Solution and within 15min.

Steps description

Standard, Sample diluent

AddStandard, Sample diluent, incubate for 30 min at 37℃.

Wash 5 time,AddHRP-Conjugate reagent, incubate for 30 min at 37℃.

Wash 5 times,Add Chromogen Solution A and B, incubate for 30 min at 37℃.

AddStopp Solution

Read absorbance at 450nm within 15 min

calculate

Calculate

Take the standard density as the horizontal, the OD value for the vertical ,draw the standard curve on graph paper, Find out the corresponding density according to the sample OD value by the Sample curve, multiplied by the dilution multiple, or calculate the straight line regression equation of the standard curve with the standard density and the OD value ,with the sample OD value in the equation, calculate the sample density, multiplied by the dilution factor, the result is the sample actual density.

Important notes

1. The kit takes out from the refrigeration environment should be balanced 15-30 minutes in the room temperature, ELISA plates coated if has not use up after opened, the plate should be stored in Sealed bag.

2. washing buffer will Crystallization separation, it can be heated the water helps dissolve when dilute . Washing does not affect the result.

3. add Sample with sampler Each step, And proofread its accuracy frequently, avoids the experimental error. add sample within 5 min, if the number of sample is much , recommend to use Volley .

4. if the testing material content is excessively higher （The sample OD is bigger than the first standard well ）,please dilute Sample （n-fold）, Please diluenteand multiplied by the dilution factor.（×n×5）.

5. Closure plate membrane only limits the disposable use, to avoid cross-contamination.

6. The substrate evade the light preservation.

7. Please according to use instruction strictly, The test result determination must take the microtiter plate reader as a standard.

8. All samples, washing buffer and each kind of reject should according to infective material process.

9. Do not mix reagents with those from other lots.

Storage and validity

1．Storage： 2-8℃.

2．validity： six months.

关键词： Human Motilin（MTL） FOR RESEARCH USE ONLY,Human Motilin（MTL） FOR RESEARCH USE ONLY,Human Motilin（MTL

上一篇：潜水泵漏水怎么办 下一篇：使用潜水泵的七点建议及故障排除

全年征稿/资讯合作 qq：1097660699@qq.com

版权与免责声明: 1、凡本网注明"来源：环保在线"的所有作品，版权均属于环保在线，转载请必须注明环保在线，https://www.hbzhan.com。违反者本网将追究相关法律责任。; 2、企业发布的公司新闻、技术文章、资料下载等内容，如涉及侵权、违规遭投诉的，一律由发布企业自行承担责任，本网有权删除内容并追溯责任。; 3、本网转载并注明自其它来源的作品，目的在于传递更多信息，并不代表本网赞同其观点或证实其内容的真实性，不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时，必须保留本网注明的作品来源，并自负版权等法律责任。; 4、如涉及作品内容、版权等问题，请在作品发表之日起一周内与本网联系，否则视为放弃相关权利。

企业推荐更多+

苏州市南瀚环境科技有限公司

主营：水泵类

产品推荐更多+

井用潜水泵
井用潜水泵是深井提水的重要设备，使用时整个机组潜入水中工作，把地下水提取到地表
面议
GOULDS 古尔兹 QRJ系列井用潜水泵
流量Q：小于1100m3/h；扬程H：小于420m 材质：铸铁、不锈钢304、316 抽送：清水或类似于水的液体，水质中性PH6.5-8.5 选用美国公司的水力模型和结构设计，采用亚什兰工艺知芯，叶片流道部位环氧涂复,火焰胶直叶轮轴,CNC机床加工各种零件等多重新工艺,产品性能优良，使用寿命长
面议
GOULDS 古尔兹 QRJ系列井用潜水泵
流量Q：小于1100m3/h；扬程H：小于420m 材质：铸铁、不锈钢304、316 抽送：清水或类似于水的液体，水质中性PH6.5-8.5 选用美国公司的水力模型和结构设计，采用亚什兰工艺知芯，叶片流道部位环氧涂复,火焰胶直叶轮轴,CNC机床加工各种零件等多重新工艺,产品性能优良，使用寿命长
面议
卧式单级双吸水平中开泵（NPS、YS型）
流量范围： 100-25000立方米/小时扬程范围： 6-200米适用范围：油田、集油站、炼油厂、海上油田原油输送、码头油轮油类装卸等，同时也适合于化工、冶金和排灌行业的使用
面议
Qy型油浸式潜水电泵
产品概述：Qy型充油式潜水电泵（以下简称电泵），由水泵、密封、电动机三部分组成
面议
QJ型深井潜水泵
产品介绍： QJ型深井潜水泵是由QJ型潜水泵和潜水电机组成一体潜入水下进行工作。具有结构简单、体积小、重量轻、安装、维修方便，运行安全、可靠、高效节能等特点。它适用于从深井撮地下水、也可用于河流、水库、水渠等到提水工程：主要用于农田灌溉及高原山区的人畜用水。
面议
QJ列井用潜水泵
QJ型井用潜水电泵是根据国家标准设计的节能产品，广泛用于农田灌溉、工矿企业的供排水和高原、山区的人、畜用水
面议
QY小型全扬程潜水泵
QY型油浸式潜水泵由立式感应电机和不同材质的泵组成，上泵结构、泵和电机同轴直联。该系列潜水泵参数广泛，流量可达3m3/h~10000m3/h，扬程范值为3~380米之间。性能优良，制造工艺，其特点：水泵和电机一体，安全可靠，高效优良、安装简单、移动较方便，是广大农村、工矿企业、城建、工程施工、高楼供水和自来水厂等给排水的理想设备，尤其适用于一般的矿山井下排水、城市高楼供水，城镇自来水公司取水和......
面议
QYB型不锈钢潜水泵
QY型全扬程潜水泵系充油式立式感应电机和不同材质的泵组成，上泵结构、泵和电机同轴直联。对于90米以上的高扬程泵还配用减压逆止阀，确保电泵在停机时的安全。该系列潜水电泵采用电子计算机进行优化设计，性能优良，制造工艺，其特点：水泵和电机一体，安全可靠，高效优良、安装简单、移动较方便，是广大农村、工矿企业、城建、工程施工、高楼供水和自来水厂等给排水的理想设备，尤其适用于一般的矿山井下排水、城市高楼供......
面议
BQW矿用防爆潜水泵（下吸式）
BQW系列下吸式矿用隔爆型潜水电泵按照MT671-2005标准要求，结合矿山排水特点设计生产，具有扬程高，功率储备大，机械强度好，安装方便等特点，能可靠隔离瓦斯等易燃易爆气体，适用于有甲烷或煤尘爆炸危险的煤矿井下非采掘工作面排水。湖南朝阳机电股份有限公司生产的BQW矿用防爆潜水泵广泛应用在矿山的排水系统，为广大的煤矿安全生产保驾护航。
面议

Human Motilin（MTL） FOR RESEARCH USE ONLY

联系我们

关注我们